Skip to content
RelayHalo

Troubleshooting

OBS keeps disconnecting: causes and fixes

Most disconnects come from the network between OBS and the server, not from OBS itself. Find the failing link, apply the fix, and make sure the next drop does not end your live.

Quick fixes to try first

  • Turn on Settings → Advanced → Automatically Reconnect in OBS, with a short retry delay.
  • Turn on the dynamic bitrate option under Settings → Advanced → Network, so OBS lowers the bitrate instead of dropping.
  • Use a wired Ethernet connection rather than Wi-Fi for the streaming computer.
  • Set your bitrate to about 70% of your steady upload, not of your best speed test.
  • If OBS reports encoding lag, use a faster preset or your GPU’s hardware encoder.

1. Read the OBS statistics

Rendering or encoding lag is a problem on your computer. Dropped frames (network) mean OBS could not keep its connection to the server. Note the time so you can match it with the relay events. The free stream test shows your stability and dropped frames in 30 seconds.

2. Check the source

Make sure the relay reports OBS as connected. If not, copy the server and stream key again, check the service selected in OBS and your local firewall. Never paste a key in a public message; replace it if it leaked.

3. Check each platform separately

One platform can reject a key or lose its connection while the others stay live. A connected output still does not prove the platform shows the live to viewers.

What you seeLikely causeWhat to do
OBS never connectsWrong server or key, no test or live started in your studio, or networkCopy the settings again from the OBS setup page, click “Start Streaming” in OBS (a signal test opens by itself) and check the OBS statistics
Secure connection failedRTMPS address or portCheck the scheme (rtmp/rtmps), the host name and the port
A platform rejects the streamExpired or wrong platform keyCopy a fresh key from the platform into the destination
A platform keeps retryingTemporary problem on that platformLet the automatic retries work and follow the event timeline

4. Keep some headroom

Do not stream at the very maximum of your connection. Start with H.264, AAC and 2-second keyframes, then follow each platform’s current bitrate advice.

5. Keep viewers while OBS reconnects

Even a good connection drops now and then. When OBS stops sending, platforms end the stream or show it offline, and viewers leave. With RelayHalo’s interlude, your platforms keep showing a “We’ll be right back” screen, or your own image or video on Streamer Plus, until OBS is back: up to 30 seconds on the free trial, 2 minutes on Streamer, 5 on Streamer Plus and 15 on Broadcast. See drop protection in the features.

Questions

Why does OBS keep disconnecting and reconnecting?

Usually because the connection cannot sustain the bitrate, Wi-Fi loses packets, or the server is far or busy. Look at Dropped Frames (Network) in OBS’s stats, then lower the bitrate or switch to a wired connection.

Does a relay stop OBS from disconnecting?

No. OBS can still lose its link to the relay. What the relay does is keep your platforms live with an interlude while OBS reconnects, and retry each platform on its own.

Why does my stream drop on only one platform?

If OBS stays connected and one platform drops, the cause is that platform’s ingest or stream key. With RelayHalo, that output retries on its own while the others keep streaming.

Ready for your next live?

Create your free account, connect OBS and your platforms, and run a private test. No card required.